HOW TO PREPARE DIFFICIL-S^®

DIFFICIL-S^® is very easily prepared and comes complete with all equipment needed for easy mixing, storage and application in a convenient ready-to-use starter kit. 

Simply fill the mixing vessel to the 10-litre mark with cold water.  Add sachet A and then sachet B to the water and stir with the supplied mixing rod for 30 seconds.  Attach the airtight pump with tubing to the mixing vessel, the solution can now be kept for up to 14 days with no loss of efficacy if needed.

Dispense the solution into the provided 500ml trigger jet bottles by placing the tubing into the bottle and depressing the pump 5 times (the pump dispenses 100ml for each depression).  There are four colour-coded bottles provided in the starter kit for different areas of disinfection (red, green, blue and yellow).  The trigger jet bottles can be used on either the spray or stream facility.  A variable angle top bottle is also available to order.  Again, efficacy is retained in the 500ml bottles for 14 days.

If DIFFICIL-S^® is required to clean large surface areas (eg. floors, walls), the ready mixed solution can be further diluted by adding DIFFICIL-S^® at a ratio of 100ml to each litre of water in the cleaning bucket.

CLINIMAX LTD PROVIDE ON-SITE TRAINING FOR THE PREPARATION AND USE OF DIFFICIL-S^® IN ADDITION TO TRAINING DVDS AND LITERATURE.

1. Use cold water from tap!	2. Add red sachet A	3. Add blue sachet B
4. Stir for 30 seconds	5. Fasten tube to applicator	6. Fasten to top of container
7. Dispense solution	For complete details on how to prepare DIFFICIL-S® including instructions for large surface areas please click here to download PDF.